Onahole Maintenance

Is there anyone out there who took male masturbator out of the box and immediately inserted it? I used to do that too. But when I really thought about it, I realized that this is an extremely dangerous thing to do.

The scary thing is inserting it without checking the internal condition; if there is a foreign object inside, you could injure your precious penis.

Fortunately, I haven't encountered any cases where foreign objects were found inside, but I have seen cases where water droplets were left inside or where there was some kind of oily substance.

The water droplets appear to be the water used to wash male masturbator during the manufacturing process, but I still think it would be unsanitary to use it as is.

Therefore, if you can turn male masturbator inside out, first turn it over and carefully check the condition of the inside. First, check if there are any foreign objects attached.

I haven't encountered this myself yet, but apparently there are some that have crystalline particles inside that act like sandpaper, so you should definitely check for this.

In addition to visually inspecting it, try touching it to check if the texture is normal. The ability to turn male masturbator inside out is a major advantage, allowing for a detailed observation of its internal condition.

After this check is complete, we recommend washing the item once before use, even if it is brand new.

Since male masturbator cannot be turned inside out, it's a bit difficult to check directly with your eyes. Because you can't see it, try putting your finger inside to check the feel.

You can also check for foreign objects and whether there is any moisture or oil remaining inside by checking how wet your fingertips are.

With Large Male Masturbators , there are cases where your finger can't reach all the way in, but with the softer male masturbator , if you press from the front and back, male masturbator will contract and your finger can reach all the way in.

After use, male masturbator will contain lotion and semen if ejaculation occurred inside, so first wipe them away with paper.

It's quite an unpleasant task, but once you get used to it, you'll be able to wipe it off with the same ease as wiping with a tissue after finishing a handjob.

For wiping, kitchen paper is definitely the best option. Unlike tissues or toilet paper, the paper doesn't tear easily and doesn't stick to male masturbator , making it very easy to wipe with.

Wiping it down to a certain extent at this stage prevents lotion or semen from directly flowing down the drain during cleaning, thus helping to prevent odors and blockages.

Wash the surface. While internal cleaning is the most important, the surface also gets dirty easily, so wash it thoroughly.

male masturbator , which can be turned inside out, should naturally be washed inside out. First, rinse lotion thoroughly with water until the sliminess is gone.

After this check is complete, we recommend washing the item once before use, even if it is brand new.

Since male masturbator cannot be turned inside out, it's a bit difficult to check directly with your eyes. Because you can't see it, try putting your finger inside to check the feel.

Once the slipperiness is gone, wash it thoroughly with hand soap. This time I used Muse, which has antibacterial properties.

After washing, wipe off any remaining moisture with a dry towel. Even though male masturbator can be turned inside out, you can't keep it inside out for an extended period, so make sure to thoroughly absorb all the moisture.

It's also a good idea to spray disinfectant spray after wiping. The picture shows a disinfectant spray called Comosui.

Since alcohol-based disinfectant sprays can potentially degrade rubber products, this non-alcohol-based spray is suitable for male masturbator maintenance.

After spraying with disinfectant spray, I let it dry, but I can't leave it inside out for too long. Even though male masturbator is highly durable and can be turned inside out, it will tear if left inside out all day.

The time limit for flipping it over is probably around 10 minutes at most, or 20 minutes at the latest.

Since we don't have much time, we'll dry it using a fan. In the summer, it's easiest and best to place it in front of a fan.

If you don't have a fan, you can use a hairdryer to dry it. In this case, use cool air, not hot air, to avoid damaging male masturbator .

Regarding the degree of dryness, the inside of male masturbator is thick and sticky sensation , so it will never dry out completely.

To wash male masturbator , which cannot be turned inside out, leave the tap running and let water in through the opening.

Water will overflow from the entrance, and we will use this flow of water to replace the water and clean the inside.

Since male masturbator cannot be turned inside out, the used lotion and the semen from inside will go straight down the drain, so I put kitchen paper in the drain cover to act as a filter.

If you're doing this in the bathroom, please refer to this method as well.

Once I feel like most of the slipperiness inside has been removed, I use hand soap. A pump dispenser is convenient because it's easy to fill with just one push.

This is not practice for fingering. We will use your fingers to carefully wash the inside. The deeper parts will contract when you push, so make sure to wash all the way to the back.

For surface cleaning, hand soap should be sufficient for normal dirt.

However, if the stains are severe, hand soap may not be enough to remove them. In such cases, Onaclean will do a great job.

I had underestimated the effectiveness of this Onaclean until very recently. That's because I was testing it on male masturbator that wasn't very dirty, so I couldn't really tell the difference in cleaning power compared to hand soap.

However, when I casually tried using male masturbator on some dirt that wouldn't come off with hand soap, the dirt came off so easily! It was like using an exfoliating scrub, with little bits of dirt coming off, and it was so clean that it felt like a layer of skin had been peeled off.

It's not a liquid detergent, but rather a granular one, like laundry powder. I'm not sure if it's the granules or the ingredients that are effective, but it seems to have the effect of trapping and lifting dirt that has penetrated deep inside. It's the last resort for stubborn stains.

Since the powder tends to fly around, you just need to be careful not to inhale it.

Since male masturbator cannot be turned inside out, the only way to remove moisture is basically with a towel, so use a towel with the highest possible absorbency.

This is a microfiber cloth that is said to absorb nearly three times more water than a regular towel.

I bought a pack of 10 towels (5 towels per pack x 2) for about 1200 yen. I think you can probably find this type of towel at home improvement stores and similar places.

Wrap a water-absorbing towel around your fingertips.

Insert your finger, wrapped in a towel, through the opening. For complex designs like Mujigen Structure , or even male masturbator with its intricate internal structure, move your finger around to absorb the moisture.

If you push in from both the front and back, your fingers will reach all the way inside, so make sure to suck it out thoroughly.

Once you think you've wiped it clean, remove the towel and check the inside for moisture with just your finger. If it's still damp, wrap the dry part of the towel around it again and wipe it dry.

To disinfect male masturbator , which cannot be turned inside out, you cannot use a spray, so use a disinfecting wet wipe.

I've heard that alcohol-based wipes can degrade rubber, so I use alcohol-free wet wipes. I'm not sure if there's actually any difference in effectiveness, though.

Alcohol-free wet wipes are sold at drugstores and other retailers.

Wrap a wet wipe around your finger.

Insert it from the entrance. It's the same as with a towel. Move your finger, feeling your way into even the smallest wrinkles and grooves with your fingertips as you wipe.

You can reach the back by pushing from both the front and back.

After washing and drying, apply powder as a final touch.

As you repeatedly wash male masturbator , its surface will become sticky and tacky. Even the smooth Safe Skin eventually becomes sticky, and you can assume that most male masturbator will become sticky as well.

As the surface becomes sticky, it becomes more prone to dirt, accumulating not only fingerprints but also dust and debris, gradually causing it to darken.

So the best way to stop this stickiness is to apply powder.

This is baby powder, which you can buy at drugstores and other places.

As you probably know, talcum powder is a very fine powder like this.

I don't dislike it, but it has a distinctive smell, so if that bothers you, you might want to choose the unscented type.

To apply it, since this type doesn't come with a puff, first put the appropriate amount of powder and male masturbator into a plastic bag.

When coating the chicken with fried chicken batter, shaking it vigorously makes it easy to coat the entire surface with the batter.

Tap away any excess powder with your hands and you're done. The surface will be transformed into a smooth, dry surface. Compared to the other methods listed below, it will still feel slightly powdery.

This is male masturbator powder. While it was developed specifically for male masturbator , its ingredients appear to be the same as those of talcum powder (Siccarol).

When you open it, there's a puff inside. The puff has a ribbon on the handle, which makes it feel a bit like women's cosmetics, and I feel a little embarrassed.

There's a hole in the inner lid so the powder comes out little by little. It has almost no smell.

Only a tiny bit of powder comes out of this hole. If you want to apply more powder, you might want to remove this inner lid.

I apply the powder by patting it on with a puff. It makes me feel like a samurai cleaning his sword. This method does give me a sense of proper care, but to be honest, it's a bit of a hassle.

Since I'm a lazy person, I thought it would be quicker to just use the fried chicken batter mix and finish it all at once.

This is a spray-type Onashut. This is the first time I've used it. The website description says it will make your skin as smooth, silky feel as an Akita beauty's, so I have to try it.

I tried spraying it on my hand. It feels quite cold when sprayed directly. It's less powdery than powder, and the particles seem finer.

When you spray it on, the surface quickly becomes smooth and dry. This particular item, Proof 009, was starting to feel sticky, but I was surprised that it finished with a smooth texture like when it was brand new.

It's not powdery and has almost no smell, so I think this gave me the best finish.

It's an easy-to-use product, but I'm curious about how long the capacity will actually last.

Once the powder coating is done, it's time for storage. Initially, I used Ziploc bags for storage, but now I've completely switched to using toy bags.

Compared to Ziploc bags, it has better breathability and does not cause oil bleeding from male masturbator , so it's great for safe storage.

Nowadays, you can find Adult Toys at various shops, so I think many people buy it together with male masturbator . It's great that there are various sizes available.

I keep all my maintenance supplies together in an extra-large bag. Since the bag isn't see-through, it's perfect for storing things I don't want others to see.