This website contains affiliate links.

How to Secure the Leten Thrusting Pro

For those who want to use it hands-free, here's how to secure Leten Thrusting Pro !

This article examines how to secure Automatic Male Masturbators Leten Thrusting Pro models with handles. We will introduce a simple mounting method that also solves problems that can occur when installing aftermarket mounting holes.

Table of Contents for this Review

[ Leten Lasting Pro] Problem with aftermarket male masturbator stopping.

Solution to the problem where the aftermarket male masturbator fails to function properly in Leten Lasting Pro.

[ Leten Thrusting Pro] Production of a standing fellatio stopper

[ Leten Lasting Pro] Problem with aftermarket male masturbator stopping.

When the dedicated male masturbator is installed, it will not touch the ground even when lowered all the way down.

However, with the aftermarket male masturbator , it touches the ground when you lower it all the way down.

It's hard to see, so I lifted the main unit a little. This is how much the opening part sticks out.

You might think, "Why not just secure it so it doesn't fall out?" But if you do that, the opening will become too tight, and the bottom will swing around too much.

Ultimately, I think the most comfortable fit is to leave the opening slightly exposed and then secure it.

Regarding this issue

I've continued using the Leten Thrusting Pro even after the review, and I've noticed some great features and issues that I didn't notice during the review.

This unit has a maximum length of 4.45 in (11.3 cm) 真空吸附特化型 ) and features a combined mode that combines the ultra-long long stroke with the short 真空吸附特化型 . The combined mode moves smoothly like the A10 piston SA, but the addition of the ultra-long long stroke makes it incredibly pleasurable.

There are five different compound patterns, and simply switching between them occasionally is enough to make you reach the finish line every time without being able to resist. If you were to isolate this part, it would be like combining the smoothness of the A10 piston SA with the best features of the handy and long stroke . Personally, I only use these five compound patterns, and they perform so well that I think it would be worth buying just for these five patterns alone.

This machine has such potential that I think it might have changed the times if it had covered low-speed modes as well. Because its shape is similar to the Fleshlight Universal Launch , I honestly underestimated it, thinking it was a typical Chinese knockoff, but its capabilities are genuine. Conversely, with this level of technical skill, I wish they would compete fairly and squarely with an original product.

I've been praising it quite a bit, but as I've used it more, I've also noticed some problems. I'm using the aftermarket male masturbator , but with the aftermarket male masturbator , when 真空吸附特化型 is lowered all the way down, the opening part of male masturbator sticks out.

This is unavoidable since it's designed specifically for male masturbator , but because the machine is used by pressing it against the body, male masturbator can be pressed too hard, activating the safety device and stopping the movement.

It's quite frustrating when something you're enjoying suddenly mellow , and this was a point of dissatisfaction for me. So I thought about whether there was a better way, and the solution I came up with is the method I'll introduce in the next section.

Solution to the problem where the aftermarket male masturbator fails to function properly in Leten Lasting Pro.

When you open the product box, you'll find this sponge inside. It's there to prevent the product from moving around inside the box, but we'll be using it for this purpose.

This sponge has this shape and grooves that match the shape of the product.

Cut along the shaded area. Cutting is easy; you can simply cut it with a utility knife.

The thickness of this sponge is key. The grooved sections are 0.79 in (2 cm) thick, and the entire sponge is 1.97 in (5 cm) thick.

When placed on this sponge, the bottom surface is extended by the thickness of the sponge, allowing the protruding part of the aftermarket male masturbator to fit perfectly.

Because it fits so snugly, it no longer sways from side to side, increasing stability.

One of the rear corners had already been cut, but I've now cut the other side as well. This improves balance, but also makes it less likely to hit my thigh when I place it on my foot.

It is used by placing it on your lap. In this case, the main unit will lean against the tabletop, providing balance.

This virtually eliminates side-to-side movement, allowing for hands-free enjoyment. Additionally, the sponge acts as a damper, absorbing a significant amount of vibration.

It can also be used on a futon. In that case, placing a futon or cushion on top will stabilize it and prevent it from tipping over backwards.

About the fixing cushion

When I was reviewing the product, I thought about how to secure the Thrusting Pro, but I didn't have much time, so I just did it haphazardly, and I wasn't at all satisfied with the method of securing it.

I've been searching for a way to secure it ever since, but considering its large shape with a handle, I thought that a simple, quick method like this would be best, rather than using a bulky mounting system like handy .

The advantage of this fastening method lies in the fact that it uses a sponge that always contains the necessary materials. Furthermore, even when this method is created, the sponge retains its original function of securing items so they don't move around inside the box.

By placing it on top of the sponge, the length of the protruding part of the aftermarket male masturbator is extended, allowing it to descend firmly to the base of the penis without stopping. Also, the sponge has a damping effect that absorbs vibrations, so I think it's not a bad way to secure it without spending money.

I really like the Thrusting Pro, so I'll continue to explore different mounting methods, but I think this is a mounting method that anyone can easily try, so if you've bought it and have the same complaints as me, please give it a try.

[ Leten Thrusting Pro] Production of a standing fellatio stopper

When using it on a desk, the device tends to move around if left unattended, so you need to support it with your hand. I wondered if there was a way to use it without having to hold it.

I bought some suitable wood from a 100-yen store.

I cut it to this size with a saw. The board is thin, so it cuts easily.

Then, you stick the boards together like this. First, apply wood glue and let it harden in this state. Leaving it for about a day is a good idea.

The next day, the glue had hardened.

Next, I used an electric screwdriver to screw it in. When I tried to do it without drilling, the wood was thin and cracked, so I drilled pilot holes with a small drill bit first, and it didn't crack. I repaired the cracked parts with glue. The strength seems fine for now.

The stopper is then secured to the desk using a C-clamp.

Place the Thrusting Pro in the cool spot, and then set the sponge you made earlier.

The sponge won't come off easily if it's properly fitted, so I just put it in without using any adhesive.

Then, simply shift your weight slightly forward and stop moving. When I say "shift your weight," I don't mean you need to consciously think about it; just standing still is fine.

The aftermarket part used male masturbator

folds Virgin Loop Strong Pitch

Price: Around 1,800 yen and up
Size: 6.30 in (16 cm)
Weight: 0.83 lb (376 g)

RIDE

Regarding stoppers for standing fellatio

When using the Thrusting Pro while standing, it's easiest to place it on a table, but then you'll need to support the device with both hands.

Well, that's fine because it gives you the feeling of doggy style, but since I'm using the Automatic Male Masturbators , I'd really like to enjoy hands-free operation.

So I made a simple stopper. I've included the dimensions, but honestly, it should be fine even if it's just an approximation. However, I recommend measuring the length on your desk to match the length of your machine.

If you have an electric height-adjustable desk, adjusting the height is easy, but if you don't, you'll need to place something under the stopper to adjust the height.

As for the most important thing, the user experience, it feels even better than I expected! Just the difference between having both hands on the machine and not having them on makes the same movements feel completely different. When you let go of your hands, it really tricks your brain into thinking you're being given oral sex while standing tall.

Also, if you finish in this position, the way you exert force is different from when you're sitting, and it's a feeling that's kind of like you're about to pee, which is a fresh and addictive kind of pleasure.

How to Secure the Leten Thrusting Pro

For those who want to use it hands-free, here's how to secure Leten Thrusting Pro !

Leten Thrusting Pro

Making a Mount for the Leten Thrusting Pro

[ Leten Lasting Pro] Problem with aftermarket male masturbator stopping.

Solution to the problem where the aftermarket male masturbator fails to function properly in Leten Lasting Pro.

[ Leten Thrusting Pro] Production of a standing fellatio stopper

folds Virgin Loop Strong Pitch