The Handy 2 Standard
The Standard model offers comparable performance to the handy2 PRO , while maintaining high cost-performance.
This website contains affiliate links. If you purchase through these links, I may earn a commission at no extra cost to you. Your support helps ONAHO.NET continue producing original product reviews.
The Handy 2 Accessories Review & DIY Sleeve Holder Guide
handy 2 has finally gone on sale, and new accessories have already been added. Many of you are probably curious about these accessories, right? We've ordered three types of accessories, so let's take a closer look at what kind of products they are.
I also made a custom male masturbator tray. I've made them for the original handy and Loob before, but I remade it specifically for handy 2. handy can't accommodate the larger male masturbator in its original state, so I think making the male masturbator tray is the most important task.
This video was created with the concept of being low-budget and easy to make, so please take a look if you are considering purchasing handy handy , or if you already own one!
table of contents
It finally arrived! Accessories for handy 2
The item I ordered from handy has arrived. Actually handy I placed a pre-order through last year's crowdfunding campaign, and it's finally arrived. It's been a long wait! As usual, it was shipped via UPS, and once it arrived in Japan, it was delivered by Fukuyama Transport. There were no customs duties.
I ordered three accessories for handy : a long sleeve holder, an extender, and a core sleeve holder. They were quite expensive.
The accessory called "The Core Sleeve Holder" is exactly the same as the holder that originally came with the device. So, it's not really an essential item.
| Product name | The Core Sleeve Holder |
|---|---|
| retailers | |
| price | $19 (approximately 3,019 yen) |
The Core Sleeve Holder Review
✔ Good points
- For example, if you have multiple male masturbator holders—one for larger sizes, one for the softer male masturbator etc.—and want to easily switch between them, this might be convenient.
× Negative points
- Since it's the same as the holder that originally came with the product, most people won't need to buy an additional one right away. You can always buy one later if yours breaks, gets lost, or you want to have multiple holders.
Instructions for attaching the Long Sleeve Holder
This is a long sleeve holder. It's about twice as long as the original holder.
The size is like this, and it's smaller than I expected. I had high hopes for this holder, and I thought I wouldn't need to make my own tray this time, but for the larger male masturbator , I think it might be better to make one myself after all. The good thing is that it comes with a top tray. That was a surprise. I have a feeling it will hold things very securely.
Since I needed to thread two bands through it, I reluctantly bought two more Grip PRO Bands, even though I thought they were expensive. Each one cost a whopping $19, so two of them came to a total of $38 (approximately 6,034 yen).
| Product name | The True Grip PRO Band |
|---|---|
| retailers | |
| price | $19 (approximately 3,019 yen) |
First, thread the band through the top tray. The holes are a very tight fit for the band size, making it quite difficult to thread.
Insert the second one in the same way.
Thread the end of the band through the tray below.
Thread both straps through, fold the ends of the bands back, and fasten the Velcro.
Insert both ends through the open holes in the bottom tray.
At this point, the setup is complete. All that's left is to insert male masturbator and then tighten the belt.
I installed the Butterfly Rail AGEHA.
male masturbator is slightly larger than average at 6.69 in (17 cm) and 1.09 lb (493 g), but it can be attached to the main unit without touching it.
I installed the Venus Real Rich Soft. Since the opening is large male masturbator ), it's making contact with the main body.
So, I tried positioning the male masturbator slightly lower to prevent contact with the entrance, but then the back started making contact. Hmm, it seems this holder isn't quite suitable for the Venus Real size.
I knew it would be difficult with Venus Real, and even more difficult with KUU-SOU Ultra Soft, but I just couldn't resist trying it, so I put it on. It was difficult to attach it sideways, but I managed to secure it vertically, although it still made contact with the surface both front and back.
Because a lot of it is sticking out, when you shake it, it wobbles quite a bit. This was clearly not going to work.
The installed male masturbator
| Product name | The Long Sleeve Holder |
|---|---|
| retailers | |
| price | $29 (approximately 4,605 yen) |
The Long Sleeve Holder's review
✔ Good points
It can be attached without any problems even to the 6.69 in (17 cm), 1.09 lb (493 g) male masturbator , so if you don't plan to use a large hole, it can be used as a fastener for medium-sized items.
This item is suitable for those who don't mind spending money and want an easy way to prepare a fixed tray because making a male masturbator tray from scratch is too much trouble.
× Negative points
The size is a little small, and the fact that it costs over 10,000 yen to get all the long sleeve holder and two bands as genuine parts is also a drawback.
In terms of practicality, the holes for the band are a little too tight, making it somewhat difficult to attach male masturbator .
Check out The Extender
The last item on the list is The Extender. This is an item that raises the height of the holder. It has a magnet and attaches by slipping it over the top.
By attaching the Extender in this way, the height of the holder section is increased.
Since the height has increased, it no longer touches the main body even with the Venus Real. This is great!
But that thought was short-lived, as the lock easily comes undone with just a slight twist like this.
Even with the slightly lighter male masturbator , the lock still came off easily. I'm too scared to use it like this!
| Product name | The Extender |
|---|---|
| retailers | |
| price | $25 (approximately 3,967 yen) |
The Extender Review
✔ Good points
- The only way to take advantage of the increased height is with lightweight official sleeves. This item is probably designed with the assumption of using lightweight official sleeves weighing around 0.33 lb (150 g), so it doesn't seem to anticipate significant weight. It's an item for those who want to use the longer official sleeves without them touching the card itself.
× Negative points
- This is an item you should not buy if you want to install the standard-sized male masturbator . The lock comes undone too easily, making it unusable. I think it's a useless item unless it's improved.
Making a custom male masturbator tray
Here's a look at the production process.
01
Sleeve holder mounting position
Hand towel trayThe sleeve holder is placed in line with the ends of the two protruding lines on the back.
02
Adhesion of sleeve holder
It straddles exactly the two linesSleeve holderSince it can be placed there, the inside and outside are glued together.
03
Choose the band to use
This is a size comparison between genuine and aftermarket parts. The top aftermarket part is the same 11.81 in (30 cm) as the ProBand, but it has a larger fold, so the size of male masturbator that can be installed isProbandIt's bigger.
04
I decided on a 14.17 in (36 cm) aftermarket band.
I initially thought about using a 11.81 in (30 cm) aftermarket band, but it was shorter than the ProBand, so I needed something a little bigger.36cmWe urgently ordered that size.Extendable typeThis is the band.
05
Thread the band through the sleeve holder.
I threaded the band through the sleeve holder. I thought it would be easier to do it beforehand than to do it after gluing.
06
Once the band is threaded through, attach it to the wet wipe tray.
For bonding to the wet wipe tray:G17 BondI use this. You can also buy it at Daiso for 110 yen. I used this G17 when I made my first DIY tray, and it stuck firmly and never came off.
I'm sure there are stronger adhesives out there, but I'm going to stick with G17 this time, trusting in its track record.
07
Secure with a clamp.
Once you've applied the G17 bond firmly, secure it with a clamp.Day 1I'll wake up.
08
Remove the clamp after one day.
The adhesive surface is messy, but it's firmly bonded. As you can see, there's quite a bit of glue.Thick coatingPlease be careful not to get any adhesive on the band.
09
Anti-slip stickers for hand towel trays
I want to add a non-slip surface to the hand towel tray. This time, I'm going to use this one, which seems to have a good reputation?Anti-slip stickersI'm thinking of trying it out. The only downside is that it's expensive.
10
Degrease the surface of the hand towel tray.
Before applying the non-slip material, the surface of the hand towel trayAlcohol typeDegrease it with a wet wipe.
11
Cut the anti-slip stickers to a suitable size.
Cut the non-slip stickers with a little extra room so that they fit the hand towel tray. If you do it right, one sheet should be enough.3 servingsIt's small enough to be picked up.
12
Attach non-slip stickers to the wet wipe tray.
After applying the adhesive side, press it down from the inside outwards, pushing the air outwards. It's easier to push the air out if you don't remove the outer film.
No adhesives usedSeal typeTherefore, it can be easily peeled off when it deteriorates.
13
Cut off the excess.
Once you've finished pasting, trim off any excess with scissors or a similar tool.
14
The anti-slip stickers have been applied.
And that's how I finished applying the anti-slip stickers. It's a shame there are a few wrinkles, but it doesn't affect its functionality, so I'll leave it as is.
15
Testing the effectiveness of anti-slip stickers
As for the effectiveness of the anti-slip stickers...it's hard to say whether they're effective or not. They're probably less slippery than having nothing on, but it's probably best not to have overly high expectations.
16
Finished! Surface of the custom-made male masturbator tray.
The second band isNot fixedIt's just sitting there.
17
Finished! The back of the custom-made male masturbator tray.
The reason I didn't fix the second band in place is because I thought it would be more convenient to be able to change its fixing position using male masturbator .
By freeing the rear band, the shorter male masturbator can be secured to the front and the longer male masturbator can be secured to the back.Adjustable to match male masturbatorThis is what it will be.
.png){kind=icon}
List of items used
| Product name | Hand towel tray, washable, available in 5 colors. |
|---|---|
| retailers | |
| price | 440 yen (tax included) |
| Product name | Trilancer Magic-Type Retractable Band Straps with Anti-Slip Straps, 36x5 cm (6 pieces) |
|---|---|
| retailers | |
| price | 1,249 yen (tax included) |
| Product name | GRIPLUS Ultra-Thin, Strong Anti-Slip Stickers, Free Cut, A4 Size (Black, 1 Pack) |
|---|---|
| retailers | |
| price | 2,070 yen (tax included) |
Installation example of the custom-made male masturbator tray.
I immediately attached the newly completed custom-made male masturbator tray to handy 2 PRO ,Venus Real RichSoftI tried attaching it.
As you can see, it fits perfectly into the tray, and male masturbator does not come into contact with the main unit.
I attached both the long male masturbator and the short male masturbator . The reason the back band isn't fixed is so that it can be moved to the appropriate position when male masturbator are of different lengths.
So far, the belt hasn't shifted or anything, so I'll continue using it like this and if any problems arise, I'll think about countermeasures.
I've attached the soft, fluffy male masturbator . With a soft male masturbator like this, there are times when you want to secure it loosely rather than rigidly fastening it with two thick belts. In those cases, you can change the second belt to a thinner one to secure it more loosely.
It's not suitable for high speeds, but for enjoying the ride at low speeds, this level of gentle fastening is perfectly fine. The advantage of having a free second strap is that it allows for these kinds of modifications.
| Product name | [Supervised by a storage professional] SOY'S F Elastic Bands/Cable Ties (Stretchable type, 0.98 in (2.5 cm) x 11.81 in (30 cm), 6 pieces) |
|---|---|
| retailers | |
| price | 950 yen including tax |
I tried on the KUU-SOU ULTRASPFT onepoint modified version.
The KUU-SOU ULTRASPFT onepoint modified version also fit without any problems. However, while handy 2 and PRO have square bodies, the male masturbator is elongated vertically, so placing the larger male masturbator on it is quite difficult.Poor balanceis.
I'm hesitant to move it using a tripod, so I want to create a more secure mounting device first.
I compared the weight of the genuine handy sleeve holder and two bands set with the weight of a homemade tray and two 14.17 in (36 cm) bands set.
Finally, here's a comparison of the costs involved. Buying everything from the original manufacturer would cost over 10,000 yen, while making it myself cost around 4,000 yen. You can make it even cheaper by replacing the original band with a generic one, or by using cheaper materials for the anti-slip material you made yourself, so please consider this only as a reference.
Whether to make your own male masturbator tray or buy genuine parts is a tough decision, but please try installing it depending on your budget and usage! Upgrading the male masturbator tray is highly recommended as the first customization for handy . I'm sure it will double the appeal of handy !