The Handy 2 Long-Term Review: Pros and Cons After 6+ Months of Use

handy2 is now being sold at a steady stream of retailers in Japan. Therefore, we would like to share new information for those who have not yet used handy2 handy2 or those who are still undecided about purchasing it.

Following its initial launch through a Kickstarter crowdfunding campaign last year, handy2 has been available for purchase on the Norwegian official website since March 2026, and in Japan since around June of the same year, with various stores gradually becoming more stocked.

Furthermore, the selling price in Japan is not significantly different at any store, with PRO averaging around 65,000 yen and Standard around 45,000 yen. Despite being a very expensive product, there is little information available about handy2 , and its appeal is still not being fully conveyed.

Therefore, after using it for more than six months, and continuing to use it for more than two months since the fixing device was made, I have compiled a progress review of handy2 , highlighting its strengths and any points of concern.

The Handy 2 Accessories Review & DIY Sleeve Holder Guide

It finally arrived! Accessories for handy 2

Six Months in the Making! How to Build a DIY Mount for The Handy 2

Tools needed for making fasteners

The Handy 2 Standard

The Standard model offers comparable performance to the handy2 PRO , while maintaining high cost-performance.

The Handy 2 PRO

It's finally been unveiled! The evolved, ultimate out-piston type machine.

Positive aspects after using the fixing device for two months after its creation

1: You can instantly refill the lotion even while it's fixed in place!

The removable sleeve holder is a selling point of handy2 , but at first, I didn't really understand its convenience.

However, after actually using it for a while, I found it to be very convenient in certain situations. One of those situations was refilling the lotion.

With the first generation model, refilling the lubricant after it was fixed in place was a major hassle. First, you had to remove the band that was holding male masturbator in place, then remove male masturbator , turn male masturbator opening upwards to inject the lubricant, and then reattach it to the mounting tray with the band.

In some cases, it would even shift to its fixed position, often requiring readjustment. Having to do this just when things were getting exciting would be a huge mood killer and really spoil the fun.

Well, this was a problem that wasn't limited to the first generation; it was present in all A10 pistons and all other Automatic Male Masturbators . So, I even seriously considered this ridiculous method of injecting lubricant.

Considering how to inject lotion into Automatic Male Masturbators

When using Automatic Male Masturbators in a fixed position, the problem is maintaining the lubrication of the lotion. It's fine at first, but the lotion with Automatic Male Masturbators dries out easily. It's smooth at first, but gradually it becomes sticky and clingy.

Especially when using it in a fixed position, regardless of the angle, it's applied downwards, so the lotion dries out quickly.

However, with handy2 , the entire holder can be removed, making it easy to point the male masturbator opening upwards! What does this mean? That's right, you can now refill the lotion and reset it without changing its position! This process can now be done at lightning speed!

This surprisingly solved a common problem that many Automatic Male Masturbators had previously faced. Anyway, take a good look at the quick lotion replenishment process of handy2 .

How about that? The lotion replenishment is so smooth! You can get back on the battlefield in no time, just like a pit stop in Formula 1.

I never initially thought that a detachable holder would have any advantages, but after actually using it, I realized that it makes refilling the lotion incredibly easy.

As you know, Automatic Male Masturbators 's lubricant dries out easily, making it almost impossible to enjoy it for a long time with just one application. Therefore, I now believe that the detachable holder alone is a reason to choose the 2nd generation over the original.

While handy2 does have buttons on the device itself, the primary method of operation is through the app.

Regarding the time it takes to connect to the app, with the previous Handyverse, it was inconsistent; sometimes it connected immediately, and other times it took a long time. Connecting was also a cumbersome process, with the Bluetooth button being difficult to find and having to copy and paste the key.

However, what I really appreciate about Handy Onboarding is how fast it connects. The UI has been improved, and once you've completed the initial setup, connecting is incredibly easy.

Some people may be hesitant because it's an overseas product, but the app can be translated into Japanese using the translation function, and it's surprisingly easy and quick to get started. I think even beginners will be able to easily start using handy2 .

Here's how to set up Handy Onboarding:

The first generation model had a cable connection, but handy2 model is now cordless.

Wired cords can get tangled, get pulled when you move the mounting brackets, or feel like they're about to come loose, which is a real hassle. But now that it's cordless, I don't have to worry about any of that anymore, so I can move the mounting brackets however I want, which has significantly reduced my stress.

At first, I thought a wired connection was perfectly fine, but after actually experiencing a cord-free setup, I realized how much more comfortable it is, and I now think that having no cords is definitely better.

Regarding the battery life of the cordless handy2 , in my case, after using it continuously for nearly 3 hours, the battery level dropped from 100% to 61%. I was surprised that even with heavy use, it only consumed about 40%. If you fully charge it, I think even people who masturbate for long periods of time probably won't run out of battery.

In my case, I have it set up so that it can be charged while fixed in place, so after use, I just remove the holder and plug in the charging cable, and before I know it, it's fully charged, which is very convenient. If you set up the arm on the edge of your desk, it's very convenient to be able to use it quickly whenever you want.

If you want to keep male masturbator part hidden, you can remove it along with its holder and put it away, leaving only the main unit, which has zero erotic elements, on your desk. Therefore, handy2 can be said to be an adult toy that is very easy to manage from a mental health perspective.

Problems that have occurred so far

A problem occurred with PRO model where the magnet on the holder's mounting base came off.

At first I didn't notice, and I thought, "Huh? It's become harder to attach the holder," but when I looked closely, I realized the magnet was gone!

I searched the entire room, wondering where it might have fallen, but couldn't find it. After doing some research, I found that a neodymium magnet with a diameter of 12mm and a thickness of 2mm would fit, so I considered ordering one, but then I found the missing magnet in an unexpected place.

Well, thinking about it, it's not that surprising, but it was perfectly attached to the base of the removable sleeve holder. Since it's neodymium, it's so strong that it was fused together and I didn't notice it.

So, I decided to reattach the detached magnet, but this proved to be quite difficult. I initially tried using Ultra Multi-purpose to stick it on, but it came off instantly.

I considered using strong adhesives like super glue or two-part epoxy, but I was worried that if they bonded too strongly, the base might crack or break.

If it can be removed, it's actually safer if it just falls off easily like this time.

Incidentally, the magnets are just there to act as guides and make installation easier, so it's possible to fix it in place even without the magnets.

However, I didn't like the look of it being detached, so this time I used G17 to attach it, and it hardened firmly, allowing me to secure it in place. The key to attaching the magnet is that it shouldn't stick out; it should be attached so that it's slightly recessed inward. For this reason, I shaved off a little of the previous adhesive-like substance on the inside to adjust the height.

G17 adhesive has the drawback of leaving a messy surface, but its superior adhesive strength more than compensates for this, and I've been using it conveniently ever since I made my first male masturbator tray. The strength is more than sufficient, and it bonded the male masturbator holder and the magnets this time without any problems, so I highly recommend this adhesive!

I want to move handy2 randomly!

Are you using handy2 for the purpose of linking it with other devices? In my case, I don't currently have any reason to use it in conjunction with other devices. One reason is that there are no domestic adult video services that can be used with handy .

I mostly use the app's controller to operate it, but this reduces immersion because my own thoughts get involved when I'm moving it, and more importantly, I get bored easily.

That's where the Random Stroker comes in, but to be honest, its performance isn't that great.

Firstly, there's the inability to save created movements as presets. This was possible before, but the classic version no longer allows this.

Furthermore, the settings themselves have some strange aspects, such as the pause time between patterns and the minimum allowable stroke setting, and I don't really understand what those settings mean.

I always set the pauses between patterns to 0 because I don't need them, but even then, there still seems to be some strange gap.

• Unable to save the created pattern
• The settings are difficult to understand.
• Unnatural waiting times occur.
• Fine adjustments are difficult.

As an official app, it's very difficult to use, and to be honest, I don't think it's very well made, so my biggest complaint is that I wish they would create a better random controller.

The official controller isn't great,handyverseforCommunity ShowcaseThere is a page where volunteers have posted useful gadgets and apps.

Among them, I found something called "The Handy Controller" created by Mr. Wingman, which is very convenient and easy to use, so I'd like to introduce it to you.

It works simply by copying and pasting the connection key displayed in Handy Onboarding. I've also included a video demonstrating the use of this controller.

There are several buttons with pre-set random patterns, and you can easily switch between them by simply pressing them.

This is it! This is exactly what I was looking for – its ease of use. I've been using this all the time lately, and I particularly like how smoothly the three patterns in the bottom row work.

This controller is highly recommended, but please note that it is not an official product, but rather one created and released by volunteers out of goodwill. We do not know how long it will remain available, and using it is entirely at your own risk.

Wingman - The Handy Controller

handy2 is compatible with male masturbator

First and foremost, please understand that I, the administrator, prefer the more laid-back, mellow type, so this is not for those who dislike the more intense or mellow type. With that in mind, I will introduce male masturbator which I personally found to be the best match among those I have used.

A10 Piston SAThe best matching male masturbator is,tentacles Shuriken SoftwareHowever, for handy2 , I would like to mention male masturbator , which is " mellow Exhaustion Spiral Yui Shimizu".

Are you familiar with this male masturbatorPuniharukonThe highly anticipated new Magic Eyes uses this material, and male masturbator boasts a volume of 1.37 lb (621 g) and a melt-in-your-mouth softness.

Puniharukon has very high material strength; I've turned it inside out many times, but the opening hasn't torn at all. I've never seen a material this soft as male masturbator , with this level of strength, except for the Rich Soft Daimao , so I'm surprised that a manufacturer can achieve this level of strength.

Furthermore, the opening is neither too narrow nor too wide, and since the electric male masturbator is always moving downwards, the fact that it is less prone to lotion leakage is another point that makes it recommendable.

Above all, its incredibly soft and meltingly smooth texture is irresistible to fans of mellow , making it the perfect choice for long, leisurely masturbation sessions. While male masturbator is a thick 1.37 lb (620 g), it's easily manageable with the power of handy2 , so those who love soft and gooey textures should definitely give male masturbator a try.

All images and videos in this article use the same " male masturbator " as " mellow Exhaustion Spiral Yui Shimizu".

mellow Exhaustion Spiral Yui Shimizu

Price: Around 4,900 yen and up
Size: 6.30 in (16 cm)
Weight: 1.37 lb (621 g)

Magic Eyes

Customizations performed after purchasing handy2

The first thing you should do after purchasing handy2 is to install the male masturbator tray. handy is designed to be used with our own slim, compact male masturbator tray, so the tray it secures to is small and has a simple design that is secured with just one band.

Therefore, if you use it as is, larger cards like male masturbator will come into contact with the main unit and cannot be securely fixed. There is an accessory called "The Long Sleeve Holder" sold separately by the official company, but from what I have tried, it is too short and the tray is too narrow, so it is insufficient for larger cards like male masturbator .

But don't worry! You don't need to buy expensive specialized parts; you can make a tray that can accommodate the large male masturbator using a 440 yen wet wipe tray. As the first customization you should do with your handy2 , we recommend installing your homemade male masturbator tray!

While watching promotional videos for handy2 , it might appear as if it's easy to use with one hand, but in reality, that's not the case at all. handy2 is actually heavier than first-gen handy , and the balance when male masturbator is mounted on it is less stable than the original, making it extremely difficult to support with one hand.

While it might be acceptable for small and lightweight male masturbator like the official male masturbator , those who want to use a larger male masturbator unit weighing over 1.10 lb (500 g) are strongly advised to use it in a fixed position.

The sleeve holder on handy2 is detachable, so if you move the larger male masturbator without securing it, the holder will easily come off when it shakes from side to side. Therefore, with this model, if you want to move the larger male masturbator , securing it is even more essential than with the original model.

At male masturbator , we've carefully selected inexpensive and easy-to-install monitor arms and readily available hardware to create them, and we've published the instructions for making them. It's incredibly easy, so please give making your own mounting brackets a try! It will open up a whole new world of handy2 !